Samsung WA50R5200AW Filter Location Guide & Explain

In this Guide, you will find out where exactly the Samsung WA50R5200AW filter location is. We will find out how to clean your washer easily and that there are 3 filters.

Samsung WA50R5200AW washer filters are one of the main components that require regular cleaning and, specifically, maintenance.  

You must know that these filters trap debris and lint inside them during laundry to prevent debris from clogging your washer’s drain.

In this guide, we focus on the main problem: the filter is not in a straightforward location, and many of us need help finding it.

With that in mind, below we will guide you on where to find the filter, and later, we shall show you how to clean your washer’s filter when you get it out.

Samsung WA50R5200AW filter location – where to find them

The Samsung WA50R5200AW has three filters, One inside the drum, which is a debris filter that is responsible for collecting debris and lint that may present in the washer drum.

Two inlet filters ensure that the water entering the washer drum is free from impurities and sediment that are located at the back of the machine. 

As you know well, The Samsung WA50R5200AW is a top-load washer machine that usually comes with three different filters.

One drain filter and Two mesh filters are located at the back of the washer where the washer hoses connect.

However, this guide is not about the mesh filters but the drain filter.

You need to remember that when it comes to top load washers, Samsung calls this drain filter the magic filter. This magic filter collects all of the lint and other unwanted things.

Let’s see where to find it now:

Samsung WA50R5200AW filter is located on the inside wall of the wash tub, and it is simply a rectangular mesh-like plastic.

So, you need to look along the inside wall of the wash tub for a rectangular mesh-like plastic.

And if you are thinking about “How to Access Samsung Wa50r5200aw Filter?” don’t worry.

Now you need To access the magic filter, close the water taps, and disconnect the water hoses from the washer.

after removing the water connection, gently remove them from the valve. By this step, you will get access to the magic filter.  

If you cannot find that magic filter, please check your Samsung WA50R5200AW owner’s manual.

Now that we have found it, what is the process for cleaning it?

Please follow the steps below:

How to clean the filter of the Samsung WA50R5200AW washing machine

When it comes to cleaning magic filters, the procedure is different between top-load and front-load washers due to differences in basic features.

You will learn how to clean the filter on your Samsung washer. We will provide separate instructions for top-load and front-load models.

How to clean the magic filter on Top loading Samsung washer

To begin, depress the tab at the top of the filter and pull it out to the right as follows:

You can remove the magic filter from the washer.

Now, remove and discard the trapped lint after pulling the plastic cover at the back of the filter.

If the lint is not removed quickly, you can use something like such as a toothbrush. Scrub to remove the lint using a brush under running water.

Your filter should be sparkling clean in no time – you can now close the lid.

Next, wipe the filter housing with a moist rag, reinsert the filter into its housing, and ensure the right side faces out.

Finally, push the top of the filter until you hear a “click,” indicating sound that the filter is now in place:

During the cleaning process, it might get damaged or have too much lint, causing it not to be enough for best-quality filtering results.

In this regard, replacing the filter is a better option.

How to clean the Samsung’s front-loading washer magic filter

1. In the beginning, unplug the washer from the power socket.
2. Use a key to open the filter cover from the washer’s bottom. In some models, there is functionality to push it, and the filter will pop it open.

3. Pull out the emergency drain hose and remove its cap.
4. Flow the water into your dish. Replace the cap if the dish fills with water, empty the dish, and repeat the process until there is no water left in the dish.
5. Rotate the drain filter in an anti-clockwise direction to remove the housing.
6. Clean out any unwanted things and debris trapped in the filter.
7. You can use hot water if the lint is too much.
8. Clean debris from the filter housing.
9. Insert the filter back into the housing by rotating it clockwise until it becomes tight.
10. Now, reinsert the emergency drain cap at the drain hose properly.
11. Close the latch and plug it back into the power socket. 
12. If the filter gets damaged during cleaning, it is better to replace it.

The right time to clean the filter

depends on your usage; the drain filter should be cleaned every seven or eight weeks.

There are signs that the filter might require cleaning earlier; if you have a front-load washing machine, you might note that your washer is having problems draining.

Your washer can display error code 5c. Remember, this error code means that the washer is not draining normally due to dirty lint.

On the other hand, if you have a top-load machine, it might leave lint on your clothes.

Those are the indications that the magic lint filters need to be cleaned. 

Samsung WA50R5200AW filter location – (FAQs)

How do I clean the filter on my Samsung top load washer?

The first step is to remove the filter from its housing, open the filter’s cover, and discard any lint if it has.

If the lint is not cleaned efficiently, use a brush as a toothbrush and scrub the filter under running water.

After cleaning, insert it back into the washer.

Where is the filter on a Samsung top loader washer?

All Samsung washers do not come with these filters. 

Usually, Samsung washers are equipped with three filters: one is magic, and the other two are mesh filters.

The magic filter is located inside the tub of the washer, which looks like a rectangular plastic box.

You need to remember that when it comes to the mesh filter, there are two located at the back of the washer where the hoses connect to the washer.

Samsung WA50R5200AW filter location – final words

We recommend cleaning your Samsung WA50r5200AW washing machine filters if possible. After cleaning it every six/seven weeks.

This will ensure that clothes do not come from the washer full of stains.

Also Read>>

Samsung dryer stops early (Fixed)

Amana Washer Stuck On Sensing Fill? How To Fix!