How To Reset Whirlpool Washer Touch Screen (Easy To Fix)

How To Reset Whirlpool Washer Touch Screen

How to reset Whirlpool washer touch screen of Modern Whirlpool washer, such as top loader models, comes with Touch screens to control intelligent features. Also, these features can be controlled via mobile Apps. However, sometimes, like other electrical devices, your washers may be unresponsive. If this happens, the touch screen might not give your touch response, and you will need to reset the Whirlpool washer touch screen.

If the whirlpool washer is not correctly working, the best and easiest way to come back in the running is to reset it. The only way to make it responsive is by resetting it. Let’s go to the main topic How To Reset Whirlpool Washer Touch Screen.

Unfortunately, Resetting the washer also deletes the memory of the washer and clears also error code.
If you do reset before clearing the error code, the washer will not work correctly, therefore, if your washer has any error code showing up, repair it first.
How To Reset Whirlpool Washer Touch Screen

Remember to reset your Whirlpool washer touch screen only if it has stopped working.

How to reset the Whirlpool washer touchscreen

For resetting the Whirlpool washer touch screen, there is no specific button. You have to reset it by resetting the whole unit.

There are some ways to reset your washer, which will fix the unresponsiveness of your touch screen.

Let’s do it with the easiest one…..

How To Reset Whirlpool Washer Touch Screen – Power cycle your Whirlpool washer

the best way to reset the Whirlpool washing machine is to read the owner’s manual.
But, you can proceed with this method for getting back in work your washer touch screen. This is the easiest and quickest method to reset your washer.

For the most of time, this works well.

  1. Turn off your washing machine by pressing the power buttons.
    However, if the power button also does not give your touch response, then proceed to the second step.
  2. Unplug from the power outlet of the washer.
  3. After a wait of 5 minutes, plug it back in the socket.
  4. Wait for 30 seconds and turn on the washer back.

It is rare that this method does not reset the Whirlpool washer touch screen. You can also try Alternative ways to reset below.

Method 2: follow these steps.

  1. Turn off your washer.
  2. Turn the mode dial to normal mode.
  3. Turn the mode daily counter-clockwise for one click left, then turn clockwise for three clicks, counter-clockwise for one click, and last clockwise for one click.

How To Reset Whirlpool Washer Touch Screen – make a combination of specific buttons

you can also reset your washer using a button combination.
It’s important to note that the right button combination can be different for each type of Whirlpool washer. To find the exact buttons to press, check your washer’s manual.

Therefore, we will go for the most common combination to reset your washer:

Turn off your Whirlpool washer

  1. Press the program button and hold it while pressing the water level button twice.
  2. Now, one at a time, press all the buttons on the panel except for the power button.
  3. Now open the lid-it should beep while opening the lid
  4. Close the lid – your washer should be reset now.

Try to turn it on and check if the touchscreen has resumed working or not.
If yes, congratulations, you have reset your washer.

If it is not, you should try other methods for resetting.

Troubleshooting When Your Whirlpool Washer Touch Screen Isn’t Responding

By turning off the control lock option

The only thing that makes the touchscreen unresponsive is the control lock.

It is essential that before going in too deep. first, you need to see the control panel. Is there a lock pad icon illuminating on the screen? If yes, then the control panel lock setting is on. which makes your washing machine typically prevent response after once activated.

But what’s the reason for it being there in the first place?

If you have kids in the house, then it helps a lot because this feature prevents accidental touches. because they’re quite curious to know and may want to operate the washer like Mommy!

Now, after knowing if it is turned on, carefully look at your touch screen- it is active, If you are seeing a locked padlock icon, it will also be illuminating.

How do I turn off the control locked setting?

You need to press and hold the CONTROL LOCK button (which you can find on the control panel) and press until the lock pad icon goes off.

I hope your washer will become fully responsive once you do that.

Check the control panel. Is it okay (dried or wet)?

Numerous reasons can make your washer touch screen unresponsive. The control panel could be wet or have moisture on it.
In that case, you need to dry your washer touch screen with a piece of cloth. This method definitely works for wet or moisture screens.

Whenever the washer shows an error code on the screen, it is not at all a good idea to reset the washer.

Here’s the question: why?

Error codes are usually signs of specific problems that your washer is having specifically. They need to be diagnosed and repaired individually.

Unfortunately, resetting the washer also deletes the memory of the washer and clears also error code.
If you reset before clearing the error code, the washer will not work correctly; therefore, if your washer has any error code showing up, repair it first.

that way, it will make it harder for you or a technician to diagnose the washer without knowing the exact error code that was there before the reset of your washer.

Therefore, do not hurry to reset it.

Instead, first of all, identify the error code in your washer’s service sheet and attempt the fixes instructed there for the fault code.

In conclusion, do only reset when the manual clearly says that you reset in an attempt to make the touch screen workable.

How do you confirm you have reset the Whirlpool washer

After the above steps its time to confirm How To Reset Whirlpool Washer Touch Screen.
Press on the start button. All the cycle-indicating lights will illuminate. If they are, press the start and stop button one time. Rotate your dail Until your three lights are illuminated: 1. Rinse light 2. Wash light 3. Stoplight. Now turn off your washer and unplug it. After twenty seconds, plug it back in; I hope you have reset your Whirlpool Washing Machine.

In the closing:

That is all about resetting your Whirlpool washer touch screen when it’s not responding to your fingers.
So we hope the steps mentioned above will fix your Whirlpool washer screen successfully. How To Reset Whirlpool Washer Touch Screen hope this article will help you to understand.

READ MORE>>

Whirlpool Cabrio washer lid lock problems (Fixed)

Frigidaire Dishwasher Diagnostic Mode (Complete Guide)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *