GE dishwasher door latch bypass (step-by-step)
If you are reading this article, there is a chance that you need help with your GE dishwasher door latch bypass. Your dishwasher is having problems, and you need help to bypass your dishwasher. You want to test whether the door is the cause.
In this regard, you need to bypass the door latch to see if it is in working condition.
In this scenario, we shall see how to bypass a GE dishwasher’s door latch.
Let us dig into the main topic:
GE dishwasher door test latch | GE dishwasher door latch bypass
Your dishwasher is probably not starting a wash cycle, and once you run a diagnostic test, it shows that of the dishwasher is not closed perfectly.
Behind these two parts might create an issue, which one is the door latch and the second is the door switch. Basically, the problem occurs when one of the two parts is faulty and broken.
Replacement is expensive for both of these parts, so you should replace the repair instead.
Also, you will want to test both parts to identify the exact culprit and replace them accordingly.
However, the main issue is that the manufacturers do not provide a straightforward way of testing the door latch and door switch.
We are here with good news for you: bypassing the door latch is an easy way of knowing which parts are making the problem.
So, see how you can bypass each of these parts and identify the exact parts that are acting up…
How To Test Door Latch on GE Dishwasher (step by step)
The door latch works in a reasonably straightforward way…
When the door strike hits the latch, the door latch holds it firmly in place – that signals that the door is indeed closed.
Now, You need to see if the latch fails. It means that either the door strike is not touching/hitting it, or the latch is not able to hold the strike firmly.
To see if it is the cause of your dishwasher’s issues, you can quickly bypass the latch Either way.
Here is how:
The first step is to bypass the door latch and open your dishwasher door.
Next, depress the door latch using a screwdriver and run a wash cycle while still depressing the latch.
See, is the dishwasher starting?
If the washer starts, then it usually means that your door latch is faulty, and replacing it is the best bet.
On the other hand, if the dishwasher does not start, then we will need to test the door switch.
Here is how:
GE dishwasher door latch
Before we start, First, be sure to disconnect your dishwasher from its power socket.
After that, you will need to have a wire to bypass your GE dishwasher door latch switch.
First, disconnect your washer’s door switch.
In the next step, connect your wire to the power source where you have just removed the door switch.
Here, you can opt to solder the wire in place or tie it around the terminals, and after tying or soldering, use electric tape for a firmer hold.
Now, it is time to test the door switch.
For the test, you will need to plug in your dishwasher and try to start a wash cycle.
If it is able to run a wash cycle, it means that your door switch is that part that was acting up, so you will need to get a door switch replacement.
Now, it’s time to move on. Other than bypassing the door switch and latch, there is still another way to test it to see if these parts are behind your dishwasher’s problems. You need a multimeter to test for the continuity of these parts.
How to test door latch for continuity
In the first step, disconnect the wire harness that is attached to the door switch and the door latch.
Next, Using your multimeter, touch both terminals of the door latch with the multimeter probes. Close the door and see if there is continuity. Your dishwasher door latch should have continuity.
Conversely, once you open the door, your GE dishwasher door latch should now need more continuity.
How to test the door switch for continuity
Now, you will need to touch the terminals of the switch with your multimeter probes to test your GE dishwasher’s door switch for continuity.
Just like the door latch, the switch should have continuity when the door is closed, while it should not have continuity if the door is open.
If your dishwasher door latch or door switch fails these tests, it is likely that it is dead. In this case, we recommend the complete Dishwasher door latch and door switch assembly.
Final Words | GE dishwasher door latch bypass
If your dishwasher door sensor indicates that the dishwasher’s door is open, it is frequently an indication that either the dishwasher’s door latch or the switch is defective.
Due to the uneconomical expense of replacing both parts, you may need to replace only the bad part while figuring out the problem.
As a substitute, you can test both parts for continuity – which also helps pinpoint the defective part.
Also Read>>
Frigidaire Gallery Dishwasher Error Codes (Fixed)
Frigidaire Dishwasher Diagnostic Mode (Complete Guide)
Is Your Bosch Dishwasher Flashing Red Light and Not Starting?
