Bosch Dishwasher Blinking Red Light

Is your Bosch dishwasher blinking red light? You don’t need to worry. In this guide, we will fix this issue with expertise.

Table of Contents

Bosch is one of the reliable brands which is known for its dishwasher’s good quality and durability. Perhaps Bosch dishwashers are one of the best dishwashers in the market right now.

Imagine This: Someone has just come to visit you and your family, and you decide to host and treat them to a delicious home-backed dinner.

After a delicious dinner, you want to clean up your kitchen, and you do. When it comes to turning to clean your dishes, you approach the dishwasher to load your dirty dishes.

After pressing the start button, you see that the dishwasher is working perfectly until you notice that it begins to flash a bright red light.

This blinking red light just won’t stop, and it starts to affect the run of the dishwaser. In that movement, you have no choice but to find a solution/fix. Then, you come to this article.

Let’s see what are the reasons which are causing your Bosch dishwasher’s blinking red light.

Why Is Your Bosch Dishwasher Blinking Red Light?

Usually, your Bosch Dishwasher blinks red light because the dishwasher’s door latch is not closed correctly. It is why most people see flashing red lights on their dishwashers.

1. The Door Latch Is Open

If your Bosch dishwasher blinks a red light, that means it is simply indicating to you that the door latch is not closed correctly.

This is an automation/feature that tells you that the dishwasher door is not closed and instructs the control panel not to run a wash cycle. Actually, it is for your own good as it is more important for your safety.

Fix | Bosch dishwasher blinking red light

The good thing about this issue is that you can solve it by just opening the door and closing it back while ensuring it closes properly and nicely.

However, if you have tried this fix, but the red light is still blinking, move to the second fix…

2. Reset The Dishwasher

If the door latch seems to be correctly closed, and you see that might not be the issue, but the light is still blinking.

Sometimes, a software glitch can cause this issue with your bosch dishwashers. Resetting the dishwasher’s control panel can fix this issue.

Proceed to reset the dishwasher.

Fix | Bosch dishwasher blinking red light

Usually, the control panel can transmit the wrong information signals to the door latch.

In this regard, resetting the dishwasher is a good idea to get it back in working condition.

Look for the Start/Power button on the control panel of your dishwasher.

Now, press and hold the start button for 3 to 5 seconds. You will notice that the display briefly shows “0:01.”

In this step, close the door and wait for 2 minutes until the dishwasher drains out the water. This action will reset your bosch dishwasher.

If your dishwasher was running and active in the previous cycle, then you might hear a draining water sound.

If the above steps cannot reset your dishwasher or you still need clarification on the reset button, please consult your owner’s manual for further guidance.

You also can reset your dishwasher by disconnecting it from the power source. Unplugged is for almost/ at least 5 minutes. After 5 minutes, plug it back into a power socket. Now, your dishwasher should reset.

This way, the machine solves the programming glitch or error and reloads the system.

3. Check For Any Water Issues

To operate in a normal way, the dishwasher requires a water supply to run. The Bosch dishwasher can flash a red light when there is a lack of water or low pressure.

Fix | Bosch dishwasher blinking red light

So, ensure that the water supply is not off or blocked and that the dishwasher gets sufficient water for the dishwasher cycle. You also need to check if the water supply hose is blocked or kinks at any point. If you notice any kinks or blockages, remove them.