Whirlpool Washer Is Leaking From Bottom | (Solved!)

Whirlpool washers are one of the most reliable and long-lasting performance models of washing. But, like other electrical appliances, a Whirlpool washer can be faulty and experience some problems. Are you facing an issue that the Whirlpool washer is leaking from bottom?

Don’t worry. After reading this article, you can quickly fix this problem without calling a Professional technician.

Models Who Are Most Affected By Leakage Issue

1. Whirlpool Cabrio Top Load Washer
2. Whirlpool Duet Steam Front Load Washer
3. Whirlpool Ultimate Care
4. Whirlpool Stackable

Why your Whirlpool washer is leaking from bottom

If your Whirlpool washer is leaking from the bottom, behind that leaking water can be caused by various issues like a hose coming loose, a faulty drain pump, door seal, pressure switch, and a faulty component of the washer machine. 

It could be an easy fix you can fix by yourself without the help of a repair technician.  Let’s dive into its first issue…

1. Replace The Faulty Drain Pump

If your Whirlpool washer leaking from bottom, it can be caused by a faulty or cracked drain pump. As a key, this component is responsible for draining water. The pump might create issues over time due to poor maintenance.

Fix

Now, you need to check the drain pump if you see water seeping out from under the washer. The cause is your drain pump may have a visible crack in it. 

Also, you need to check the drain pump’s continuity. In this regard, grab a multimeter to test the continuity.

1. To do the test, follow these easy steps:

2. Turn off/Unplug your Whirpool washer from the power socket.

3. Using a screwdriver, remove the access panel.

4. Inspect it and clean it thoroughly for any debris.

5. If you see no clog, test the pump’s connectors with a multimeter for electrical functionality.

6. If the drain pump has become faulty, detach it from the washer and replace it with a new one.

In any case, if you need more clarification about replacing the drain pump, seek help from a professional technician.

Now, reattach the washer’s cover and run a wash cycle to ensure the pump works correctly.

2. Unclog the Drain Pump Filter and Drain Hose

If your drain pump is in excellent working condition and you find no defects, you have to consider checking the drain pump hose and filter.

According to our experience, A clogged, faulty, and loose hose is a common problem that can lead to the Whirpool washer’s leakage.

Fix

When your washer’s drain pump filter gets clogged with junk and debris, it does not let water drain, and water overflows. You can clean it using water pressure to clear out the debris.

To fix that issue, you need to check the drain pump hose and see if there are any holes in it. Replacement is our suggestion if it is clogged or has a hole.

Additionally, check if any kinks block the flow of water. If yes, shortening or straightening the hose can fix this issue.

Now, move to fix and unclog the drain pump filter. Follow these easy steps:

1. You need to open the dispenser at the base of the washer by pulling the handle.

2. Navigate to the drain pump filter, and remove the drain pump filter from the washer by releasing the tabs on the sides.

3. Clean the pump filter from lint, gunk, and debris.

4. Wash the drain pump filter properly and reattach everything back to the washer.

Remember that safety always comes first before fixing the washer’s internal components. Unplug/turn off your washer.

Tip:

If you found your washer’s drain pump and drain filter in excellent and working condition but the washer still leaks, double check the hose connection, which might be loose. Ensure that it’s attached properly to the washer.

3. Replace the Broken Motor Coupling

If your washer’s drain hose and drain pump is in exelent position, move to the next possible cause. 

The Whirlpool washer is leaking from the bottom. A broken coupling could be the issue. The motor shaft is connected by the coupling to the direct-drive transmission to run the washer.

Fix

The motor coupling consists of plastic parts joined by rubber isolators to protect the drive motor from damage. Ignoring a leaking washer can be harmful and lead to more issues.

Follow these steps to replace the motor coupling:

1. Turn off your washer.
2. Remove the access panel and motor retainer screw.
3. If the motor coupling is damaged, remove it, replace it, and reassemble your washer.

4. Inspect the Outer Washer Tub for Leaks

If your Whirlpool washer is still leaking from the bottom, the issue could be with the outer tub, which holds the inner tub. 

The outer tub supports the inner tub by containing water and laundry in a wash cycle.

Fix

You must check if the outer tub may develop cracks, holes, and rusting water due to wear and tear. 

Fill your washer with water and inspect the tub to see if it leaks. If it’s a leakage you have identified, let’s move on to troubleshooting it.

Remember that if your washer is less than a year old, you may get a free replacement of the outer tub due to a warranty from Whirlpool.

You can replace it by yourself or call a technician for help.

5. Replace the Malfunctioning Level Switch

A faulty pressure switch could be behind the leakage of your washer. The pressure switch/level switch controls the water level in your washer. If the water level is faulty, your washer will not identify the water level of the washer, which can cause overflows.

Fix

Because it prevents overflow by stopping the washer from adding more water when it reaches the limit.

In that case, a leak could occur when the level switch malfunctions and its wiring is not connected correctly.

Follow these steps to fix the level switch:

1. Unplug your washer from the power source, using screwdriver open screws access to the panel.
2. Navigate to the pressure switch/level switch.
3. Inspect for any visible damage to the level switch and circuit board.
4. Remove the pressure switch/ level switch.
5. Replace it with a new one and reattach the control panel. 

After replacing the level switch, you must run a test wash cycle to ensure the washer works appropriately.

Don’t Forget:

Before fixing any component, remember to unplug your washer from the power source.

6. Replace the Faulty Water Inlet Valve

If your Whirlpool washer is leaking from the bottom, it might have a faulty water inlet valve or be clogged. 

As an experienced technician, I explain that the water inlet is responsible for filling your washer with water. A faulty water inlet could be the cause of a leak. Check it for limescale build-up or debris on it. 

Fix 

Follow these steps to solve this water inlet valve issue:

1. You need to test the water inlet valve with a multimeter for continuity.
2. If you see it is defective, replace it.
3. Clean your valve screen and an inline flow filter from debris and dirt to prevent future issues.
4. After taking the above steps, your Whirpool washer should stop leaking from the bottom.

It’s better to Call a technician if you are uncomfortable with replacing the water inlet valve.

Final Words | Whirlpool Washer Is Leaking From the Bottom

It will be frustrating when your Whirlpool washer leaks from the bottom; its life/preference can be at least ten years. Please don’t be too hasty to throw it out.

We encourage you to fix your washer with patience in such situations.

In this regard, we are providing a list of possible issues, and they are fixed.

Recap This List Again:

1. Replace The Faulty Drain Pump
2. Unclog the Drain Pump Filter and Drain Hose
3. Replace the Broken Motor Coupling
4. Inspect the Outer Washer Tub for Leaks
5. Replace the Malfunctioning Level Switch
6. Replace the Faulty Water Inlet Valve

After following these steps, there is a chance that your Whirlpool washer is still leaking water from the bottom. 

In this case, Don’t hesitate to contact a Whirlpool repair appointment, especially when your washer is still under warranty.

We value your suggestions, please drop your thoughts, additional tips, and also questions in the comment section below.

Frequently Asked Questions

Why Is My Washing machine leaking water underneath it?

Many issues and components can cause your Whirpool washer to leak from the bottom. A faulty water pump and loose or clogged drain hose are the most common examples of a washer that leaks bottom. You need to change or unclog these components to fix this issue.

Why Is My Whirpool Washer leaking out the bottom?

Your Whirpool washer is leaking from underneath because of a loose drain hose, and it could be clogged with debris and lint. To fix that issue, you need to unclog it. If it’s not possible, then replace it.

How do I fix a leaking Whirpool washing machine?

Try these fixes:

1. Replace The Faulty Drain Pump
2. Unclog the Drain Pump Filter and Drain Hose
3. Replace the Broken Motor Coupling
4. Inspect the Outer Washer Tub for Leaks
5. Replace the Malfunctioning Level Switch
6. Replace the Faulty Water Inlet Valve

Why is my Whirlpool washing machine leaking from the front door?

If your washer leaks from the front door? Because of a damaged door seal. Replace the door seal if you notice that it is ripped or damaged.

Is it worth Fixing a Leaking Washer?

You need to estimate its fixing costs if the repair cost equals a new washer or more. Don’t repair it; instead, it is better to purchase a new one. If the repair cost becomes a manageable challenge, we recommend fixing it.

How long Do Whirlpool Washers Last?

The manufacturers claimed that the Whirlpool washers usually have a life/performance of ten years. Many Whirpool users also make this claim. If you do proper maintenance and adequately handle it.

See Also>>

Bosch Dishwasher Blinking Red Light

Whirlpool Cabrio UL Code When Empty

How To Reset Frigidaire Oven In No Time